Filtration Equipment, Filters | TSI Filtration Technologies

Equipment:

The TSI Lint Collection Filter (LFC-1) is a compliment to any Commercial Laundry air system. Designed to remove moist lint from the air stream prior to exhausting the air; the modular design allows for the LCF-1 to be incorporated into new designs as well as efficiently being used in retrofit applications. The LCF-1 is designed to allow for variance in speed. This allows designers to control filtration efficiency as well as material loading capacities. The LCF consists of a rotating wheel with support spokes. The wheel is covered with an application appropriate screen mesh. The wheel is supported with two pedestal bearings and driven by a direct driven motor/gearbox combination with either a belt drive or a chain drive. The suction nozzle used to remove the lint includes a brush and an air nozzle to air in the release of the lint from the screen. The wheel is enclosed with a steel housing which includes access doors on both the clean and dirty side of the wheel. The access doors also include inspection ports for inspection during operation. The unit can be combined with an optional heating coil to recover waste heat from the dryers to pre-heat air or water for the Laundry.

Download the
Lint Collection Filter brochure and specifications in PDF format

Cellulose and Personal Care Industry

In manufacturing of personal care products such as paper or diapers, hygroscopic particles and cellulose waste are produced. With appropriately designed and selected equipment the recyclable material is returned into the production process and the waste is removed.

Textile Industry

In a cotton mill, fibers and dust particles are removed from the cotton through the machine extract air system. The fibers can be separated and recycled and the waste disposed of.

Glass Fiber Manufacturing

When manufacturing glass products shod fibers and dust waste are generated. These contaminants must be removed prior to discharge of the air into the atmosphere. Special filtration and separation equipment will help to remove this waste from the air and either recycle or dispose of it.

Coarse Particle Filtration

Pre-Filter/pre-separator The air stream loaded with particles passes through a pre-screen. The mesh size of the screen can be adapted to the panicle size to be separated.

Advantages

continuous cleaning, which equates to
no pressure fluctuations in the process
space saving installation
efficient separation of material using different mesh sizes

Fine Particle Filtration
Drum Filter

Dust laden air passes through a fine filter. Depending on the amount of solids and the filter surface loading, a cake or mat is formed. Cleaning is done with a continuous vacuum provided by suction nozzles.

Advantages

continuous self-cleaning, equates to no pressure fluctuations in the process
no compressed air required
high filtration efficiency
wide range of filter materials available


Home About Us Products Equipment Contact Us SPANISH Site Equipment: Lint Collection Filter The TSI Lint Collection Filter (LFC-1) is a compliment to any Commercial Laundry air system. Designed to remove moist lint from the air stream prior to exhausting the air; the modular design allows for the LCF-1 to be incorporated into new designs as well as efficiently being used in retrofit applications. The LCF-1 is designed to allow for variance in speed. This allows designers to control filtration efficiency as well as material loading capacities. The LCF consists of a rotating wheel with support spokes. The wheel is covered with an application appropriate screen mesh. The wheel is supported with two pedestal bearings and driven by a direct driven motor/gearbox combination with either a belt drive or a chain drive. The suction nozzle used to remove the lint includes a brush and an air nozzle to air in the release of the lint from the screen. The wheel is enclosed with a steel housing which includes access doors on both the clean and dirty side of the wheel. The access doors also include inspection ports for inspection during operation. The unit can be combined with an optional heating coil to recover waste heat from the dryers to pre-heat air or water for the Laundry. Download the Lint Collection Filter brochure and specifications in PDF format Cellulose and Personal Care Industry In manufacturing of personal care products such as paper or diapers, hygroscopic particles and cellulose waste are produced. With appropriately designed and selected equipment the recyclable material is returned into the production process and the waste is removed. Textile Industry In a cotton mill, fibers and dust particles are removed from the cotton through the machine extract air system. The fibers can be separated and recycled and the waste disposed of. Glass Fiber Manufacturing When manufacturing glass products shod fibers and dust waste are generated. These contaminants must be removed prior to discharge of the air into the atmosphere. Special filtration and separation equipment will help to remove this waste from the air and either recycle or dispose of it. Coarse Particle Filtration Pre-Filter/pre-separator The air stream loaded with particles passes through a pre-screen. The mesh size of the screen can be adapted to the panicle size to be separated. Advantages continuous cleaning, which equates to no pressure fluctuations in the process space saving installation efficient separation of material using different mesh sizes Fine Particle Filtration Drum Filter Dust laden air passes through a fine filter. Depending on the amount of solids and the filter surface loading, a cake or mat is formed. Cleaning is done with a continuous vacuum provided by suction nozzles. Advantages continuous self-cleaning, equates to no pressure fluctuations in the process no compressed air required high filtration efficiency wide range of filter materials available